
There is a need to replace or uninstall oxygen sensors because oxygen sensors have a significant role in operating vehicles. The oxygen sensor detects the amount of oxygen emitted by the burning of gases.
It also ensures the adequate ratio of oxygen needed. When the oxygen sensor does not identify the correct ratio of oxygen or does not work correctly, you need to replace it.
Oxygen sensor socket is used to remove or install various types of oxygen sensors on all old and modern computerized controlled engine vehicles. The sensors are an essential part of vehicles and should be carried by all drivers.
Oxygen sensors are located in various positions in different vehicles. Modern vehicles have a little space to reach the sensors. Wrenches are, therefore, not an ideal choice these days.
To overcome this problem, the Oxygen Sensor Socket Set is designed to reach those places.
The primary use of these oxygen sensors in your vehicle is to control the performance of car engine and fuel adjustment and ignition.
The issue you usually face in your car system is a vacuum leak or sticky fuel injector. Sometimes you experience the lousy quality of sensors that you need to replace.
For all these problems, the Oxygen Sensor Socket is the best solution.
Here we have described the Best Oxygen Sensor Socket. Have a look at it.
IN A HURRY? Here’s Our Top Picks…
Last update on 2023-09-20 / Images from Amazon Product Advertising API
Top Rated Oxygen Sensor Socket Reviews
1# Tooluxe 20764L Oxygen Sensor Socket
- [APPLICATION]: This o2 sensor wrench is ideal for removing and installing oxygen sensors including hard-to-remove sensor sockets and vacuum switches on automotive vehicles with computer-controlled engines.
- [VERSATILE]: The oxygen sensor wrench set comes with 3 different types of sockets to cover various situations of oxygen sensor removal.
- [DESIGN]: The universal 6-point 7/8” (22mm) socket opening on the sensor wrench fits all hexagon oxygen sensors and common 3/8” and 1/2” drive ends can be used with a ratchet or breaker bar.
- [FEATURES]: The special side cutout design allows for easy access to oxygen sensors from any compartment and prevents damage to wires under your car hood at the home or garage.
- [INCLUDES]: 1-pc 3/8” dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” dr. offset crowfoot socket wrench (1-15/16” long), 1-pc m18 x 1. 5mm and 1-pc m12 x 1. 25mm thread chaser kit with 3/8” drives to clean and repair damaged threads for auto repair.
Last update on 2023-09-19 / Images from Amazon Product Advertising API
This Tooluxe set is ideal for the drivers moving in vehicles daily. This set has three different types of sockets, which will be helpful in almost all types of cars. You can use this socket in all situations when you need a wrench.
Its unique side cutout design gives you easy access to open oxygen sensors wherever you want without damaging the wires. It is user friendly, and everyone can use it, whether a professional mechanic or a general user.
Things We Like:
- Unmatched quality that provides extra durability
- The secure grip that holds a sensor for easy removal and installation
> Check Price and Reviews on Amazon <
2# ARES 70318 Oxygen Sensor Socket 10 Piece
- INCLUDES: This set includes a 29mm 1/2-inch drive Vacuum Switch Socket, 27mm 1/2-inch drive Injector Socket, 27mm 3/8-inch drive Oil Sender Unit 1-inch Socket, 22mm 3/8-inch drive Vacuum Switch Socket, 22mm 1/2-inch drive Heated O2 Sensor Socket, 27mm 3/8-inch drive Oil Sender Unit 1-1/16-inch Socket, 22mm 3/8-inch drive 6-Pt Offset O2 Sensor Wrench, M12 x 1.25mm and M18 x 1.5mm O2 Sensor Rethread Tools, and a 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket."
- QUALITY: All tools in this 10-piece Oxygen Sensor Socket Set are constructed of high strength Chrome Vanadium Steel with a Manganese Phosphate coating to resist corrosion."
- STORAGE: This Oxygen Sensor Socket set comes complete with convenient storage case so you'll never misplace a socket on the job again!
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Oxygen Sensor Socket Set, simply contact customer service for troubleshooting help, parts, replacement, or refund."
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, weâ€re proud to help this great organization."
Last update on 2023-09-20 / Images from Amazon Product Advertising API
ARES 70318 Sensor set is a real gem that will worth your money. The set having 10 pieces makes it easier for you to open various types of sockets.
The tools are made up of Chrome Vanadium Steel with a corrosion-resistant Manganese Phosphate coating for long-lasting use.
ARES socket has a lifetime warranty, so if there is any problem, you can contact customer services for repairing, refunding, or replacing.
As this set has 10 different types of sockets, you do not need to worry about its storage. ARES provides you a storage case so that you will never misplace any socket.
Moreover, in this case, it will be convenient for you to take it anywhere.
Things We Like:
- Manganese Phosphate coated to avoid corrosion
- Lifetime Warranty
> Check Price and Reviews on Amazon <
3# Powerbuilt 648691 3/8” Dr 7/8” Oxygen Sensor Wrench
- SPECIALTY TOOL MAKES EASY WORK: Slotted designed for removing and installing 7/8 inch 22mm oxygen sensors in hard to reach locations without removing or damaging wiring harness
- BUILT TOUGH: Impact-rated Chromoly steel; precision casting for accurate fit and long tool life
- WORKS IN TIGHT SPACES: Wrench offset design for added working depth; works with 3/8 inch drive tool or breaker bar for improved leverage
- HIGH QUALITY: Meets or exceeds ANSI
- Slotted design allows removing oxygen sensor with wiring harness attached
Last update on 2023-09-20 / Images from Amazon Product Advertising API
The slotted design of Powerbuilt sensor wrench makes it possible for you to remove the sensor even from hard to reach places. This tool is both time and money saver.
This tool is made up of steel. It is designed to remove oxygen sensors that are wired harness attached.
The size 7/8” (22m) almost fits in all types of sockets. You can set it up at different angles, which allows you to loosen or tighten any sensor.
Insert socket directly into driver wrench, and you will have full control and torque and set to uninstall any socket.
Things We Like:
- Covers hard to reach places
- Premium Chrome Vanadium Steel Construction
> Check Price and Reviews on Amazon <
4# Wrench and Thread Chaser Set 5 Pieces
- Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines
- 3 Different types of sockets cover various situations of oxygen sensor locations
- Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires
- Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
Last update on 2023-09-20 / Images from Amazon Product Advertising API
These tools will worth you a single penny. This set is ideal for you if you have a modern type of vehicle because modern vehicles provide you narrow space in the socket to replace. This set has 3 different types of sockets to handle any type of sensors.
Its specially designed sockets allow you to remove or uninstall an oxygen sensor from any section without damaging its wires. Its universal 7/8” socket almost fits all hexagon oxygen sensors and other socket sizes like 3/8” and 1/2” drive ends can be used to ratchet or break the bars.
Things We Like:
- Generate more torque because of the offset design
- User-friendly price
> Check Price and Reviews on Amazon <
5# Tekton 47749 3/8” drive by 7/8” Offset Oxygen Sensor Socket
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
- Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
- Use with any 3/8 inch drive ratchet or breaker bar
- High-performance chrome molybdenum steel construction
Last update on 2023-09-20 / Images from Amazon Product Advertising API
This socket is ideal for computer-controlled engines due to a little space for reaching sensors. The standard size 7/8” (22m) of this socket makes it possible to handle all types of sensors. The offset design of this socket prevents damaging the wires.
This socket is made up of high-quality Chrome Molybdenum Steel construction and can be used with 3/8” drive ratchet or breaker bar. This socket allows you to change the oxygen sensor on your vehicle single-handedly and saves your money from a professional mechanic. The offset design is ideal for extra leverage as well.
Things We Like:
- Affordable price
- Lifetime warranty
> Check Price and Reviews on Amazon <
Best Oxygen Sensor Socket Buying Guide
Oxygen sensor sockets are designed for specific purposes. If you want to replace the socket and go to the mechanic’s shop, he normally charges you high to replace the socket.
Oxygen sensors are available in market in cheap price but you need the right tools to replace it. It will save your money as well as your time because you don’t need to waste time driving your vehicle to the mechanic’s shop.
Buying the right socket for your vehicle is also important because not all vehicles contain the same size of oxygen sensors. It will waste both your time and money if you do not select wisely.
Here are some factors that you need to consider before buying an oxygen sensor socket or socket set.
Size of Sockets
The most important factor before you buy a socket is its size. First, have a look at your vehicle’s sensor and then choose whether it will fit properly.
Fortunately, there are various sizes of these sockets available in the market. You can choose according to your vehicle. There is also a complete set of socket boxes available in the market, having all in one place.
Your Budget
As described above, it is cheaper to have your own socket to save your money. But let’s dive deeper and search for the different sockets available varying their prices.
You can choose a single socket, 3 piece socket set, 5 piece socket set, and even 10 piece socket set according to your budget.
Quality of Sockets
The quality of the socket matters a lot. Choose the socket or socket set that has good quality and made with fine material. It should be corrosion resistant for longer use so that you can use them again and again.
FAQs
Q: What tools do I need to change an oxygen sensor?
A: If you want to change your vehicle’s oxygen sensor you need following tools to change it.
- New oxygen sensors
- Jack
- Jack stands
- Ratchet Wrench
- Oxygen sensor socket
- Penetrating oil
- Scanner, to detect the problem
Q: How do you use an oxygen sensor socket?
A: An oxygen sensor socket is used to remove or fix the oxygen sensor. If your oxygen sensor is not working and you want to change it, then an oxygen sensor socket will help you.
Q: Should you replace o2 sensors in pairs?
A: Yes, it is an ideal option to replace your sensors in pairs. If you are going to replace the downstream right corner, then you should replace downstream left sensors also.
It is because the new sensor’s working will be much faster than the old one. So keep it in balance, you should change in pairs.
Q: Can I replace the oxygen sensor myself?
A: Yes, you can replace your oxygen sensor by yourself. All you need is a new oxygen sensor and an oxygen sensor socket to remove or install it.
You can buy sockets of different sizes according to your vehicle’s sensor size. It will save your money that you mostly give to a mechanic and you time to take your vehicle to the mechanic’s shop.
Q: Can you clean an oxygen sensor?
A: Yes, if you feel that your oxygen sensor is dirty, you can clean it. For cleaning your oxygen sensor, first of all, you need to remove your sensor from its housing. If the sensor is stuck due to its longevity, you can spray the sensor with WD-40.
Wait for 10-15 minutes after spraying so that this will lubricate and loosen the sensor. After that, remove it safely and easily for cleaning. When you will remove it from its housing, submerge it into a gasoline bucket. Gasoline will clean it, and you can fix it again.
Conclusion
An oxygen sensor socket is very helpful for drivers, and for you if you drive your vehicle. It will help you to make you faster and cheaper.
It will save your money and time as well. We have described the best oxygen sensor socket and socket sets to help you. You can choose the one that best fits you.
Leave a Reply